Our range of Gas Masks and Cartridges provides protection against gas, vapour and dust.
Please find below our range of combined filters for dust, vapour and gas.
GAS CARTRIDGE
PROTECTION LEVEL: A1P2 R
Protection against organic gases, vapour and dust
Easy fitting filter system
Suitable for our masks
Bayonet connector
Particulate filters can either be connected with the gas cartridges or directly with the mask body.
Adaptors and particular pre-filters are not necessary
Simpler Logistics – 30% less parts
Particualte filters with pleated Filter Technology: significantly reduces breathing resistance, improves wearer comfort & reduces fatigue
Particulate filters tested and certified to EN 143:2000+A1:2006
Gas filters and pre-assembled filters tested and certified to EN 14387:2004+A1:2008
GAS CARTRIDGE
PROTECTION LEVEL: A2P3 R
Protection against higher concentration of organic gases, vapour and dust.
Easy fitting filter system
Suitable for our masks
Bayonet connector
Particulate filters can either be connected with the gas cartridges or directly with the mask body.
Adaptors and particular pre-filters are not necessary
Simpler Logistics – 30% less parts
Particualte filters with pleated Filter Technology: significantly reduces breathing resistance, improves wearer comfort & reduces fatigue
Particulate filters tested and certified to EN 143:2000+A1:2006
Gas filters and pre-assembled filters tested and certified to EN 14387:2004+A1:2008
GAS CARTRIDGE
PROTECTION LEVEL: A1B1E1K1P3 R
Protection against higher concentrations of organic gases, additional gases, ammonia, vapours and dust (see table).
Easy fitting filter system
Suitable for our masks
Bayonet connector
Particulate filters can either be connected with the gas cartridges or directly with the mask body.
Adaptors and particular pre-filters are not necessary
Simpler Logistics – 30% less parts
Particualte filters with pleated Filter Technology: significantly reduces breathing resistance, improves wearer comfort & reduces fatigue
Particulate filters tested and certified to EN 143:2000+A1:2006
Gas filters and pre-assembled filters tested and certified to EN 14387:2004+A1:2008
GAS CARTRIDGE
PROTECTION LEVEL: A1B1E1K1HgP3 R D
Protection against higher concentrations of organic gases, additional gases, ammonia, mercury vapours,, vapours and dust (see table).
Easy fitting filter system
Suitable for our masks
Bayonet connector
Particulate filters can either be connected with the gas cartridges or directly with the mask body.
Adaptors and particular pre-filters are not necessary
Simpler Logistics – 30% less parts
Particualte filters with pleated Filter Technology: significantly reduces breathing resistance, improves wearer comfort & reduces fatigue
Particulate filters tested and certified to EN 143:2000+A1:2006
Gas filters and pre-assembled filters tested and certified to EN 14387:2004+A1:2008
Please, find below tables showing the levels of protection.
INFORMATION ABOUT PARTICULATE FILTERS
Protection Level
Protection level | Colour | Workplace Exposure Limit (WEL) |
P1 | 4 x WEL [half mask] 4 x WEL [full face mask] | |
P2 | 10 x WEL [ half mask] 10 x WEL [full face mask] | |
P3 | 20 x WEL [half mask] 40 x WEL [full face mask] |
INFORMATION ABOUT GAS FILTERS
Protection Levels
Protection level | Colour | Hazard types | Examples | Maximum use level |
A1 | ![]() |
Organic gases and vapours, boiling point > 65°C | Working with solvents created by varnish, paints and adhesives | 10 x WEL [half mask] 20 x WEL [full face mask] or 1000 ppm whichever is lower |
A2 | ![]() |
As A1 | As A1 but to higher concentrations | 10 x WEL [half mask] 20 x WEL [full face mask] or 5000 ppm whichever is lower |
A1B1E1 | ![]() |
As A1+ inorganic gases and vapours + acid gases | As A1 + working with chlorine, bromine, hydrogen cyanide, hydrogen sulphide, hydrochloric acid and other acid gases | 10 x WEL [half mask] 20 x WEL [full face mask] or 1000 ppm whichever is lower |
A1B1E1K1 | ![]() |
As A1B1E1 + ammonia | As A1B1E1 + working with ammonia | 10 x WEL [half mask] 20 x WEL [full face mask] or 1000 ppm whichever is lower |
A2B2E1 | ![]() |
As A1B1E1 | As A1B1E1 but to higher concentrations | 10 x WEL [half mask] 20 x WEL [full face mask] or 5000 ppm (A + B), 1000 ppm (E) whichever is lower |
AX | ![]() |
Organic vapours boiling point ≤ 65°C | Working with low-boiling vapours e.g. acetone, dichloromethane | For single use only National legislation may limit maximum usage levels. Please contact us for details |
Hg P3 | ![]() |
Mercury | Working with mercury vapours | Maximum use time against mercury 50h |
Please see our Full Gas Face Mask and Half Gas Face Mask compatible with these filters.
Please contact us to order or get more information.
This post is also available in العربية, Español, Français, Português and Pусский.